The “EXPERT” Off-Road weighbridge is a high structural strength design to withstand very high concentrated axle loads of articulated vehicles used in off-road applications, where the loads can range from 100t to 800t.
Quarrying and mining operations present some of the harshest environments for weighbridge. Our weighbridge has been providing accurate and reliable weighing. Accurate weighing is the key factor for the mining and construction industries, from mine exploration to waste recycling; you will need our high precision balances, with a large capacity of up to 200 tons, you can move our Mining weighbridges easily and you do not need to do a new civil job, the new sensor modules can guarantee the accuracy for concrete tanks.
Benefits Of Off-Road Weighbridges
Raft foundation helps in Low cost of ownership.
Strong construction, reliable & long life
Fully Welded Platform Structure
Flexible Module Design
Easy loading/unloading Quick Installation
Box Channel (Hollow) & Fully Welded I-Beam Type
Checkered & Plane plate with anti-skid strips
Platform Length : 6 Meter ~ 24 Meter
Platform Width : 3 Meter ~ 4 Meter
Accuracy Class: OIML-approved Class–III
Weighing Capacity: 200 t
Both Side Vehicle Guide Rails
We provide Off-Road Weighbridge Manufacturer in UAE and we supply our products in various locations like Hatta, Al Madam, Dhaid, Ghayathi, Liwa Oasis, Jabel Ali, Ruwais, Dubai, Abu Dhabi, Sharjah, Al Ain, Khaimah, Fujairah, Umm Al-Quwain, Dibba Al-Fujairah, Khor Faikkam, Kalba.
Please contact us at the following address for further information about our products/catalog:
On-board weighing, which is often employed on tipper trucks, tankers, and bin Lorries, includes using load cells to monitor the load imparted to a vehicle. The weight of what is “on-board” will be measured by the load cells, hence the term. This allows the driver to potentially load the vehicle to its full capacity without risking over-loading.
It also means that knowing exactly what is added or offloaded lets the vehicle operator compute costs and charges accordingly, demonstrating that employing load cells for on-board weighing allows haulage companies to operate at maximum efficiency while maintaining safety.
There is no need to use weighbridges because there is an ON BOARD WEIGHING SYSTEM installed on the equipment itself. It allows you to know the exact quantity of the material you’re loading / unloading and, by optimizing the vehicle load, avoids under and overload charges. It also aids in speeding up the loading process and determining the wheel loader’s actual productivity.
Loader Weighing Systems, Dumper Weighing Systems, Excavator Weighing Systems, Articulated Dump Truck Weighing Systems, Forklift Weighing Systems, and others are among the products available.
Expert Weighing Assistance On-board weighing systems come with a plethora of capabilities that make them ideal for use in mine. Our Loader and Dumper Weighing Systems make it easy for customers to keep track of their fleet.
We provide On-Board Weighbridge Manufacturer in Maharashtra like Mumbai, Pune, Nagpur, Nashik, Vasai-Virar, Solapur, Bhiwandi, Amravati, Kolhapur, Akola, Latur, Jalna, Panvel, Navi Mumbai, Parbhani, Dhule, Nanded, Jalgaon, Ahmadnagar, Chandrapur.
Please contact us at the following address for further information about our products/catalog:
We have designed and developed Portable Weigh Pad using high-strength aluminum alloy and high-density plastic/rubber compound under the guidance of our expert personnel. These weigh pads are used to maximize ambulance-vehicle handling performance and driving stability and to keep compliance with road overloading regulations.
This Portable Weigh Pad is a kind of easy-to-use axle-weighing solution, introduced to customers. We have kept our price range minimal and delivery is made in a hassle-free manner. Our customers can purchase these products at the most appropriate industrial rates.
Introducing the third generation Portable Axle Weigh Pad. Remembering, regularly developing prerequisites of our profitable customers, we are putting forth a selective range of Portable Axle Weigh Pad.
Portable Weigh Pads are made of aluminum alloy & High Alloys Steel Based. Underside there are several entries sealed and then sensors embedded in the plate.
Our clients can avail us of an extensive range of Tank Weighing Systems, which are widely acclaimed for easy installation, high accuracy, and calibration.
These weighing systems are used to weigh the exact amounts of solid and liquid material, which is filled or discharged from industrial hoppers, silos, bunkers, tanks, and mixers. Our range is available in different types, which include crane weighing systems and milk weighing system
We Provide Weigh Pad Weighbridge Manufacturer in Africa and we supplier to products in various locations like Ghana, Kenya, Cameroon, Burundi, Angola, Chad, Algeria, Egypt, Burkina Faso, Comoros, Benin, Senegal, Ethiopia, South Africa, Nigeria, Mali, Gabon, Morocco, Uganda, Kampala, Jinjha, Ghana, Zambia.
Please contact us at the following address for further information about our products/catalog:
Expert multiple deck weighbridges are a design variation rather than a different type of weighbridge. A multi-deck weighbridge, for example, can be above ground, semi-pit, or fully underground. The number and length of the decks are determined by your needs. Decks don’t have to be the same length. Individual axles or axle groups are weighed individually and simultaneously on a multiple deck weighbridge. This is ideal for a weighbridge’s primary function of recording axle breakdown weights.
Expert Multiple deck weighbridges are a design variation rather than a different type of weighbridge. A multi-deck weighbridge, for example, can be above ground, semi-pit, or fully underground. The number and length of the decks are determined by your needs. Decks don’t have to be the same length. Individual axles or axle groups are weighed individually and simultaneously on a multiple deck weighbridge. This is ideal for a weighbridge’s primary function of recording axle breakdown weights.
We provide Multi Deck Weighbridge Manufacturer in Bangladesh and we supplier to products in various locations like Bhairab, Bogra, Brahmanbaria, Chandpur, Chowmuhani, Chudanga, Comilla Sadar Dakshin, Faridpur, Feni, Jessore, Jhenaidah, Kadam Rasul, Kaliakair, Kushitia, Naogaon, Narsingdi, Pabna, Saidpur, Satkhira, Savar, Tangail, Tarabo, Tongi.
Expert Weighing Solution is pleased to launch its newest product, the “Unmanned Weighbridges.” The highest quality standards are used in the production of these weighbridges. To offer features that were previously unheard of in the Indian market, the most recent and cutting-edge technology is utilized. These weighbridges, which can be any type, are automated and computerized. They don’t need any manual assistance, and they operate smoothly to provide the most precise and accurate results.
The unmanned Weighbridge system is an independent system that enables operator-free weighing operations every day of the week, 24 hours a day. Due to its simple operational interface, a truck driver may easily operate it. Additionally, our unmanned weighbridge customizes the system to meet the particular needs of the operation of our client. Intelligent software called automated weighbridge software transforms a weighbridge into a straightforward unattended terminal, enabling 24×7 operation with no operator present and resulting in significant operational cost savings. to learn more about an unmanned weighbridge.
Features :
CCTV Cameras to record the vehicles coming for weighment.
InfraRed radiations to detect the presence of vehicles.
Computer Software for complete computerized operations.
Boom barriers (if required) for controlling the flow of vehicles.
We provide Unmanned Weighbridge Manufacturer in Tanzania and we supplier Our products various location like Salaam, Mwanza, Arusha, Dodoma, Mbeya, Morogoro, Tanga, Kahama, Tabora, Zanzibar City, Kigoma, Sumbawanga, Kasulu, Songea, Moshi, Musoma, Shinyanga, Iringa, Singida, Njombe, Bukoba, Kibaha, Mtwara, Mpanda, Tunduma, Makambako, Babati, Handeni, Lindi, Korogwe, Mafinga, Nansio.
Please contact us at the following address for further information about our products/catalog:
Installing concrete platform weighbridges makes excellent financial sense given the escalating cost of steel. In addition to being affordable, it is strong, nearly maintenance-free, and doesn’t need painting every year. Its lifespan is 100 years as opposed to a standard steel platform’s 15 years. The industrialized world has been utilizing concrete platforms for more than 30 years due to their benefits. 95 percent of computerized weigh bridges constructed in Europe have a concrete platform.
Cost savings increase as the platform lengthens. Longer vehicles and trailers are becoming more common in modern transportation. Longer models with greater payload capacities are being introduced by MNC truck manufacturers like Volvo, who have begun manufacturing in India. Greater loads may be supported by the concrete platform weighbridge. Because of this, every modern bridge that can be seen on city highways is made of concrete or composite material.
A truck entering the weighbridge with a lot of weight on it jerks violently as it brakes. As a result, the vibration must be kept to a minimum to preserve the load cell’s life and accuracy. Steel experiences substantially greater vibration than concrete because the latter absorbs vibration.
We Provide RCC Weighbridges Manufacturer in Ahmedabad, Gujarat, India we supply our products to various locations like Mehsana, Gandhidham, Silvassa, Daman, Ankleshwar, Bhavnagar, Surendranagar, Bhuj, Dahej, Vadodara, Surat, Vapi, Valsad, Kheda, Anand, Nadiad, Vatva, Kathwada, Rakhial, Naroda, Jamnagar, Junagarh, Amreli, Modasa, Himmatnagar, Deesa, Palanpur, Gandhinagar, Bhalla, Rajkot, Morbi, Mumbai, Delhi, Banglore, Kolkata, Chennai, Pune, Nagpur, Haridwar, Dadra Nagar Haveli, Bharuch, Bhachau, Etc.
Please contact us at the following address for further information about our products/catalog:
A flat, hard surface is all that is needed for a mobile weighbridge to rest its load cell plates. Both money and time are greatly saved. Mobile weighbridges may be installed in 2 hours whereas traditional weighbridge foundation and installation take 2-3 months. Additionally, moving these weighbridges to a different location is simple. The modular design makes movement and reinstallation simple and affordable.
These are steel-fabricated, ramp-equipped modular platforms. The top plate is checkered steel. The machine includes a bottom frame made of steel fabrication. Between the bottom and top frames, load cells are mounted. The conventional foundation is replaced with the bottom frame.
All that is required for the bottom frame to rest is a hard, smooth surface. Mobile Weighbridges We provide a variety of mobile weighbridges to our customers. These are fully licensed, completely mobile, and self-contained units that can be put up in a matter of minutes at almost any place.
Applications
Construction & Infrastructure, Road Construction Company, Forestry, Rubbish for landfill sites, Demolition materials ex-site, Agriculture industry, Quarries, Military.
Benefits
Modular Design- Machine supplied complete with platform, bottom frame, and ramps
Needs no foundation
Installation in hours
Can be shifted to another site easily
Keeps vigil on costly materials
Significantly saves time & construction costs
Most suited for temporary sites
We provide Multi-Axle Weighbridge manufacturers in Nepal and we supplier to product various locations like Kathmandu, Pokhara, Patan, Birgunj, Biratnagar, Dharan, Bharatpur, Janakpur Dham, Dhangadhi, Butwal, Mahendranagar, Hetauda.
Please contact us at the following address for further information about our products/catalog:
This kind of weighbridge has ramps on either end to provide cars access to the platform because it is higher than the paved surface. Surface mounted scales require less civil foundation work than other types of scales, but more overall space is needed. Check the ‘Weighbridge’s’ overall height before making a purchase. Longer ramps are required for higher decks, which expands the weighbridge’s overall footprint and the turning circle for approaching vehicles.
In order for cars to be positioned centrally on the weighbridge, guide rails must typically be put on the platform’s edges. When the bridge may need to be moved, or for temporary (often referred to as “portable”) installations, this style of installation is more suited.
The type of weighing machine you choose from the market will often depend on your positioning factors, such as your convenience at home. Every surface and pit-mounted weighbridge requires a stable, load-bearing surface; the specifics are ready to be laid out in the “Plan of Foundation” drawings provided by the supplier of the weighing equipment.
A weighing device with a common structural design for surface and pit mounting may be desirable as it may provide for future flexibility for dynamical weighing devices.
We Provide Pitless Weighbridge Manufacturer in UAE and we supply our products in various locations like Hatta, Al Madam, Dhaid, Ghayathi, Liwa Oasis, Jabel Ali, Ruwais, Dubai, Abu Dhabi, Sharjah, Al Ain, Khaimah, Fujairah, Umm Al-Quwain, Dibba Al-Fujairah, Khor Faikkam, Kalba.
Please contact us at the following address for further information about our products/catalog:
This kind of weighbridge works best in small spaces, such as flat, non-hilly areas where building a pit is not an expensive endeavour. Vehicles can approach the weighbridge from any direction because the platform is parallel to the ground. This design is preferred by most public weighbridges.
These weighbridges are installed in a pit, keeping them flush to the road surface. Because these bridges do not require ramps, they take up less surface area, making them ideal for smaller areas or sites where space is at a premium.
Initial civil and foundation work can make pit installations a more expensive option. A pit is also prone to piling of debris and water logging, requiring provision of sump-pumps and manholes for maintenance purposes. Guide-rails are not required for pit mounted bridges.
This type of installation is better suited when the bridge may need to be shifted, or for temporary (sometimes called ‘portable’) installations.In most cases the site conditions, such as availability of space, will dictate the type of weighbridge available to you.
Both surface and pit mounted weighbridges require a firm surface with load bearing capacity, the details of which will be specified in the ‘Plan of Foundation’ drawings provided by the weighbridge supplier.It may be advantageous to choose a weighbridge which has a common structural design for surface and pit mounting, this will allow future flexibility for changing the type of weighbridge.
Benefits :
Lesser Space Required (As it has no ramps)
Rickshaws & Tractor Trolleys can also be weighed as platform is in flush with ground Level.
No Ramp require for truck movement because it is installed in land surface level
Costly Foundation
We provide Pit Type Weighbridge Manufacturer in Maharashtra like Mumbai, Pune, Nagpur, Nashik, Vasai-Virar, Solapur, Bhiwandi, Amravati, Kolhapur, Akola, Latur, Jalna, Panvel, Navi Mumbai, Parbhani, Dhule, Nanded, Jalgaon, Ahmadnagar, Chandrapur.
Please contact us at the following address for further information about our products/catalog:
The load cell plates on a modular truck scale can lay on any hard, smooth surface without the requirement for a foundation. Both money and time are greatly saved. While the foundation and installation of a pit or pitless weighbridge might take up to three months, a modular truck scale can be set up in about two hours. The modular design makes movement and reinstallation simple and affordable.
“Ease of Erection” is the primary attribute of a modular weighbridge. The modular weighbridge may be readily disassembled and then reassembled at any other place.
These weighbridges can be quickly and easily taken down and rebuilt in a different location. It is possible to arrange for a regular truck to transport the modules.
A weighbridge has a modular design, is completely welded, and is sturdy to handle the intended load. Even though they are kept in place by fasteners, the loose components, such as girders, plates, and transoms in a traditional weighbridge and the main girders in a surface-mounted version, move relative to one another while trucks are weighed on a cycle.
Over time, this impact causes the parts to deteriorate and need to be replaced. The modules that make up a weighbridge are totally welded and have no loose parts, thus the effect of cyclic loading does not pose an issue, reducing the need for maintenance.
Features of Modular Weighbridge
High Strength
Good for Accuracy
Low Maintenance
Facility to upgrade further
We Provide Modular Weighbridge Manufacturer in Africa and we supplier to products in various locations like Ghana, Kenya, Cameroon, Burundi, Angola, Chad, Algeria, Egypt, Burkina Faso, Comoros, Benin, Senegal, Ethiopia, South Africa, Nigeria, Mali, Gabon, Morocco, Uganda, Kampala, Jinjha, Ghana, Zambia.
Please contact us at the following address for further information about our products/catalog:
